How to 3D map a disaster area with an Autel EVO Max 4T
To 3D map a disaster area with an Autel EVO Max 4T, fly a manual grid with orbits in its native app, then upload the video to SkyeBrowse. SkyeBrowse processes it in the cloud at about one minute per minute of video and returns a large-area orthomosaic and 3D model of the damage that you can measure, compare, and share. Upload the drone's .ASS subtitle file with the video to georeference the model, and Public Safety & Enterprise models reach 0.1 inch accuracy without ground control points.
Applies to the Autel EVO Max series, including the EVO Max 4T.
Capture the disaster response with the EVO Max 4T
Manual flight
The SkyeBrowse Flight App does not support the EVO Max 4T, so fly it in its native app. Fly a manual grid over the area and combine it with orbits around key features. Commercial accepts up to 3 videos per model (10GB each) and Public Safety & Enterprise accepts up to 10 videos per model (100GB each).
Georeference the model
Turn on .ASS subtitle recording on the Autel aircraft before takeoff. Upload the .ASS file with the video and SkyeBrowse georeferences the model automatically.
Autel setup tutorial
Follow the SkyeBrowse Autel EVO II and Max 4T tutorial to enable .ASS subtitle files for georeferencing.
Process the video
Upload the MP4 or MOV file at app.skyebrowse.com. Processing runs at about one minute per minute of video, and most models are ready 5 to 10 minutes after upload. Public Safety & Enterprise models reach 0.1 inch accuracy and Commercial models reach 0.5 inch, with no ground control points.
Outputs and measurements for disaster response
Orthomosaic and 3D model
Every model includes an auto-generated top-down orthomosaic alongside the textured 3D model.
Volume measurements
Calculate volumes directly from the model on paid plans.
Exports
Send GeoTIFF and LAZ files to GIS software on export-enabled models.
Frequently asked questions
Does the SkyeBrowse Flight App support the Autel EVO Max 4T?
No. Fly the Autel EVO Max series, including the EVO Max 4T manually in the native app and upload the MP4 or MOV video through Universal Upload at app.skyebrowse.com.
How do I get accurate measurements from EVO Max 4T video?
Turn on .ASS subtitle recording on the Autel aircraft before takeoff. Upload the .ASS file with the video and SkyeBrowse georeferences the model automatically.
Can SkyeBrowse map areas larger than one acre?
Yes. Use WideBrowse grid flights in the Flight App on fully supported drones, or fly a manual grid with orbits and upload the video through Universal Upload.
Map your first site today
Create a free account, upload one drone or phone video, and open a measurable 3D model in minutes. Agencies that need CJIS compliance and 0.1 inch accuracy can request a quote for Public Safety & Enterprise.
