How to 3D map a fire scene with an Autel EVO II V2
To 3D map a fire scene with an Autel EVO II V2, fly SkyeBrowse (Orbit) or WideBrowse (Grid) with Side Scan in the SkyeBrowse Flight App on iOS, then upload the video to SkyeBrowse. SkyeBrowse processes it in the cloud at about one minute per minute of video and returns a measurable 3D model of the fire scene that you can annotate with standardized fire symbology and share. Upload the drone's .ASS subtitle file with the video to georeference the model, and Public Safety & Enterprise models reach 0.1 inch accuracy without ground control points.
Applies to the Autel EVO II Pro, 6K, 8K, Dual, and 640T in their V1 and V2 versions.
Capture the fire scene documentation with the EVO II V2
iOS only
The Flight App supports the EVO II V2 on iOS only, so fly from an iPhone or iPad.
Automated flight
Fly SkyeBrowse (Orbit) mode around the structure. When the lot around it matters too, fly WideBrowse (Grid) and add Side Scan, an orbital pass that captures facades and verticality.
Add the interior
Use the EVO II V2 for the exterior. Record the interior with a phone (4K recommended, 60fps, wide-angle, slow and smooth) or a 360 camera, upload it with the Interior Mapping toggle on, and merge both models with 3D Overlay (Premium).
Georeference the model
Turn on .ASS subtitle recording on the Autel aircraft before takeoff. Upload the .ASS file with the video and SkyeBrowse georeferences the model automatically.
Autel setup tutorial
Follow the SkyeBrowse Autel EVO II and Max 4T tutorial to enable .ASS subtitle files for georeferencing.
Thermal variant
If you fly the EVO II Dual and 640T, note that SkyeBrowse lists Thermal Mapping as a plan-dependent feature. Confirm it is active on your plan before you rely on thermal output.
Process the video
Upload the MP4 or MOV file at app.skyebrowse.com. Processing runs at about one minute per minute of video, and most models are ready 5 to 10 minutes after upload. Public Safety & Enterprise models reach 0.1 inch accuracy and Commercial models reach 0.5 inch, with no ground control points.
Outputs and measurements for fire scene documentation
Public Safety Icons
Place NAPSG fire, EMS, and all-hazards symbols on the 3D model and manage them from the object tree.
3D Overlay
Merge interior and exterior models into one scene for a walkthrough from the street to the room of origin.
Case Gallery
Pin multiple photos to a single annotation and page through them in a gallery scoped to that point.
Walk Mode
Move through the model at eye level with WASD keys and an adjustable eye height.
Frequently asked questions
Does the SkyeBrowse Flight App support the Autel EVO II V2?
Yes. SkyeBrowse fully supports the Autel EVO II Pro, 6K, 8K, Dual, and 640T in their V1 and V2 versions: the Flight App flies automated SkyeBrowse (Orbit) and WideBrowse (Grid) missions on iOS only.
How do I get accurate measurements from EVO II V2 video?
Turn on .ASS subtitle recording on the Autel aircraft before takeoff. Upload the .ASS file with the video and SkyeBrowse georeferences the model automatically.
Can I combine interior and exterior fire scene models?
Yes. 3D Overlay stacks multiple models in the same viewer, such as an interior model on an exterior drone model, with no manual file switching.
Map your first site today
Create a free account, upload one drone or phone video, and open a measurable 3D model in minutes. Agencies that need CJIS compliance and 0.1 inch accuracy can request a quote for Public Safety & Enterprise.
